System message

Linksys (SPA) Provisioning

The following will detail the steps in configuring RadiusCat MT to Remotely Auto Provisioning the following Linksys (CISCO) products:

• SPA9000—IP PBX with Auto-Attendant; can be used with the SPA400, which provides a SIP-PSTN gateway 
• Linksys Analog Telephone Adapters (ATAs): 
• PAPT2T—Voice adapter with two FXS ports 
• SPA1001—Small VoIP adapter 
• SPA2102—Voice adapter with router 
• SPA3102—Voice adapter with router and PSTN gateway 
• RTP300—IP router with two FXS ports 
• WRTP54G—Wireless-G IP router with two FXS ports
• SPA900 Series IP phones: 
• SPA901—One line, small, affordable, no display 
• SPA921—One-line business phone 
• SPA922—One-line business phone with Power over Ethernet (PoE) support and an extra Ethernet port for connecting another device to the LAN 
• SPA941—Default is two lines, upgradeable to four lines 
• SPA942—Default is two lines, upgradeable to four lines. Power over Ethernet (PoE) support and an extra Ethernet port for connecting another device to the LAN
• SPA962—Six lines, hi-res color display. Power over Ethernet (PoE) support and an extra Ethernet port for connecting another device to the LAN

 Note: A Linksys VoIP device that supports the remote provisioning options described in this document is referred to generically as a SPA.

1. Log into RadiusCat (as Super Admin) and click the [Provisioning (IP Phone)] > [Provision::Linksys (SPA)] menu option. This will take you to the Linksys (SPA) default provisioning settings
2. Ensure that the settings displayed on the module are settings that you would like to Auto-Provision in the SPA. If there is a specific setting that you want to omit from the Auto-Provisioning process, then edit the Provision Key and uncheck the ‘Include’ value for that Key. Like wise if you would like to change the default value for a Provision Key, then simply edit  the Provision Key and make the change to the Provision Value and save the item.
3. Ensure that the value for the Profile_Rule parameter key is correct. This is the URL that instructs the SPA how to contact the RadiusCat MT Provisioning Server.
4. Open the Account that you would like to associate with an SPA by going to the Tenant>Tenant Group>Users>User Extension module.
5. Click on the User Extension and then click the Provisioning TAB to access.
6. Enter the Provisioning Information for this extension that you would like to be Auto-Provisioned to the SPA:

• Enable Auto Provisioning: To enable/disable Auto-Provisioning for this Extension
• Device Type:  Select the model Number for the Linksys SPA that you will be Auto-Provisioning this Extension to
• Device MAC Address: Enter the MAC Address of the Linksys SPA
• Identity/Extension #: The model of the Linksys SPA will dictate the number of Extensions that it can handle. Select the extension number for the SPA that you would like to Auto-Provision this account for.
•  Display Name: Enter the name that will be displayed for outbound calls made by this extension
• Station Name: Enter the text that will be displayed as at the very top of the SPA’s LCD/Colour display (if applicable).Click the SAVE button

Linksys (SPA) Configuration

1. Upgrade the SPA to the latest stable firmware
2. Perform a Factory RESET of the SPA (if necessary)
3. Connect to the SPA using a Web Browser
4. Click on the Provisioning TAB and set the ‘Profile Rule’ setting to be the following:
   • [--key password] http://xxx.xxx.xxx.xxx/RadiusCatMT/Provision/LinksysSPA.aspx?mac=spa$MAU.cfg&prod=$PN
     Where:
     password – this is the symmetric password that will be shared between the SPA and the RadiusCat Provisioning Module
     xxx.xxx.xxx.xxx – This is the IP Address or URL of your RadiusCat Mt installation
      
5. Click the ‘Submit All Changes’ button to the save the changes to the SPA
6. Reboot the SPA